Not affiliated with or endorsed by the NBA. Team names are used descriptively.

Guide

How does Sleeper fantasy basketball work? Lock-In Mode, scoring, waivers and IR

Updated 8 min read

Short answer

New Sleeper basketball leagues use Lock-In Mode: only one game per player per week counts, and after a player's game you can lock that score in before his next game starts. If you never lock, his last game of the week counts, even a zero. Scoring is points-based with 22 adjustable settings, waivers follow your league's waiver settings with FAAB as an option, and IR slots take IR-tagged players plus whatever the commissioner allows.

What makes Sleeper basketball different?

Most fantasy basketball is a volume game: every game your players play adds to your total, so a player with four games beats one with two. Sleeper changed that. Its default format for new leagues, Lock-In Mode, counts only one game per player per week. Sleeper’s own help center explains the reason: without it, managers whose players have more games could win a matchup just because they had more chances to score.

Two other facts set the frame:

  • It is a points game. Sleeper says formats such as Rotisserie, Head-to-Head Categories and 9-Cat may be considered in the future, but it has no plans to offer them now.
  • Game Pick Mode is closing. The older Game Pick format is only available to leagues renewed into 2026-27. A new league cannot be created in it.

Weekly matchups run Monday through Sunday, and Sleeper supports leagues of up to 32 teams in redraft, keeper and dynasty formats.

How does Lock-In Mode work, exactly?

The rules are short, and every one of them matters.

  • After your player finishes a game, you can lock in that score for the week.
  • You must lock it in before that player’s next game starts.
  • Once locked, the score is fixed, you cannot lock a later game for him that week, and you cannot move him to another position.
  • A lock cannot be undone, even if his next game has not started.
  • Only a game played while he was in your starting lineup can be locked. A bench player who just had a big night cannot be moved into the lineup to claim it. You can, however, move a starter between starting spots and keep the right to lock.
  • A free agent you add cannot bring his most recent game with him. He counts from his next game.
  • If you never lock, Sleeper uses his team’s final game of the week. If he did not play it, you get zero. Sleeper never reverts to an earlier game.
  • If his next game is postponed, you can lock his previous score until the new start time, as long as the postponed game is still his next game.

Sleeper also does not merge the two weeks around the All-Star break into one matchup, and says it does not plan to. A commissioner can zero out either week instead, which makes it a tie for every team.

When should you lock in a score?

This is the strategy in Lock-In Mode, and it is a stop-or-continue question. Lock a good game too early and you miss a better one. Wait too long and you are stuck with whatever the last game gives you, including a rest-day zero.

A made-up example to show the shape of it. Suppose a player averages 40 fantasy points a game in your league’s scoring, and most of his games land within about 10 points of that. If you pass on every game, you get his last one, which is worth about 40 on average. That sets the bar for the game before it, and so on backward:

Games still to come after this one Lock if this game scored at least (made-up player)
0 It counts anyway, it is the last
1 About 40, his average
2 About 44
3 About 46

The numbers come from a simple model (each game an independent draw around his average), so treat them as a shape, not a rule. The shape is the point: the more games left, the higher the bar, but the bar rises slowly. A score well above a player’s average early in the week is usually worth taking.

Two adjustments push you toward locking earlier. A player with an injury tag or a history of sitting the second night of back-to-backs may not play the last game, and a zero is worse than an average game. And a player whose last game of the week is the second night of a back-to-back carries that rest risk into the default. The back-to-back page shows where those nights fall.

How does Sleeper basketball scoring work?

Sleeper offers 22 scoring settings, and its default set gives points for points scored, rebounds, assists, steals, blocks, turnovers, three-pointers made, double-doubles, triple-doubles, technical fouls and flagrant fouls. The other eleven (field goals and free throws made, attempted and missed, three-point attempts and misses, offensive and defensive rebounds, and personal fouls) are there for your league to weight.

Two stacking rules catch leagues out, and Sleeper documents both:

  • Rebounds stack. If your league scores Rebounds and also Offensive or Defensive Rebounds, a player earns both on the same board. Sleeper recommends scoring one or the other.
  • Double-doubles and triple-doubles stack. A triple-double earns the triple-double value and the double-double value.

Because the point values are your league’s own, a ranking built on another league’s values can be wrong for yours. Connect your league on League and Fantasy Hoops HQ reads its scoring settings, so the rankings price every player in your point values from his historical per-game averages.

How do waivers and FAAB work on Sleeper?

Sleeper’s waiver behavior is a combination of league settings, so read yours rather than assuming:

  • After Games Waiver Clear. Once a player’s game starts he locks and goes to waivers until your league’s clear day.
  • Time on waivers after a drop. A dropped player waits the number of days your league picks. Sleeper’s example: on 2 days, he sits on waivers for 47 hours and claims process in the 48th. Sleeper recommends 1 or 2 days.
  • The 24-hour rule. A free agent you add must stay on your roster for 24 hours. Drop him sooner and he goes straight back to free agency, not to waivers.
  • Custom Daily Waivers. Each day of the week can be set to free agency, waivers, locked, or waivers then free agency.

FAAB is optional. It is a blind bid from a season budget, most commonly $100, and a $0 bid is allowed. It only works if your league has a waiver period enabled. In the playoffs, standings stop updating, so Reverse Standings priority is not available, and leagues use FAAB, rolling waivers, or both.

How does IR work on Sleeper?

Sleeper uses four injury tags in basketball:

Tag Sleeper’s meaning
GTD (Game-Time Decision) A 50/50 chance of playing
D2D (Day-to-Day) Probably won’t play the upcoming game
Out Won’t play and could miss about a week
IR Out indefinitely or for the season

A player with an IR tag can always go in an IR slot. The commissioner has two IR options in the mobile app’s General Settings, one of which lets day-to-day players in alongside Out players. In Lock-In Mode the injury rule is blunt: if a player does not play, swap another player in or take zero for him that week.

How do trades and the deadline work?

Sleeper leagues are open year-round, and draft picks can be traded in every league type (redraft picks only before that season’s draft). There is no veto button: Sleeper leaves cancelling a trade to the commissioner. After a trade processes, a player who has not played that week can be used by his new team at once, while a player who already played stays with the original team, with his points, until the next week.

The trade deadline is a week your league picks. It falls when the final game of that NBA week ends, and after it you cannot propose or accept trades. A trade accepted before the deadline can still process afterward if your league has a review period.

What can Fantasy Hoops HQ do for a Sleeper league?

Connect your league on League and the site reads your rosters, your scoring settings and your schedule of matchups. You get every team ranked from the per-game averages of the rosters they hold now, rankings in your point values, and playoff odds from your real schedule. The draft companion follows a Sleeper draft live. It is free (sign in with Google to use the tools), and it uses historical per-game averages only. It does not model which game you should lock in each week: that call, with the table above as a guide, is yours.

Common questions

What is Lock-In Mode on Sleeper?

It is Sleeper's default basketball format. Only one game per player per week counts toward your matchup. After a player's game ends you can lock it in, but you must do it before his next game starts, and once locked the choice cannot be undone.

What happens if I forget to lock in a player on Sleeper?

Sleeper takes the fantasy points from his team's final game of the week. If he did not play that game, you get zero. Sleeper does not go back to an earlier game.

Does Sleeper have head-to-head categories or roto for basketball?

Not at the moment. Sleeper's help center says Rotisserie, Head-to-Head Categories and 9-Cat may be considered in the future, but there are no plans to offer them now. Sleeper basketball is a points game.

Who can go on IR in Sleeper fantasy basketball?

Any player with an IR tag can always go in an IR slot. The commissioner has IR options in the mobile app's General Settings, including one that lets day-to-day players in along with players tagged Out.

When is the trade deadline on Sleeper?

Your league picks a week, and the deadline is when the final game of that NBA week ends. After that you cannot propose or accept trades. Trades accepted before the deadline can still process afterward if your league has a review period.

Sources

Checked on .

Try in tradeCompare

Per-game numbers in the named window. Games are this season's schedule under your league's games limit.