Not affiliated with or endorsed by the NBA. Team names are used descriptively.

Guide

Punt free throw percentage build: who to draft and what to avoid

Published 7 min read

Short answer

Punting free throw percentage means giving up that category and drafting high-volume bigs who rebound, block shots and shoot a high field goal percentage but miss at the line. Because free throw percentage is weighted by attempts, those players are discounted most in normal rankings. Re-rank with FT% at zero, target FG%, rebounds and blocks, and commit for the whole season.

What does punting free throw percentage mean?

You stop trying to win free throw percentage, and you build a roster that gets stronger everywhere else because of it. The category itself is lost most weeks. In exchange, you can roster players whom the rest of your league discounts for one reason: they miss free throws.

It is the most common punt in 9-cat and 8-cat leagues because the players it unlocks are so concentrated. RotoWire’s category primer says the shooting efficiency categories are “the most commonly punted categories, and with good reason”, and gives the example of a big man who becomes a top-10 player “if you can ignore his dreadful FT%”. The general idea is covered in our guide to punting. This post goes deep on this one build.

Why does punting FT% work?

Two reasons stack on top of each other.

The category is weighted by volume. A team’s free throw percentage is total makes over total attempts. A player who shoots many free throws at a poor rate moves your team number far more than one who rarely goes to the line. That is why the damage from a poor free throw shooter is concentrated in the players who get fouled the most, which is the same group that scores efficiently inside. How it works shows the arithmetic: the value of a percentage is the made shots a player adds over a league-average shooter taking the same attempts.

Once you stop caring, that damage disappears. When FT% is set to punt, the category weighs nothing in a player’s value. A player who was held back by a large negative number there jumps up your board, while a balanced player stays put. The value you recover is then spent on categories you can actually win.

What player archetypes does a punt FT% build target?

You do not need names to draft this build. You need types, and a ranking that is re-sorted for the punt.

  • High-volume rim finishers who get fouled. Bigs who score by dunking and rolling, draw many fouls and convert a low share at the line. They tend to be strong in field goal percentage and rebounds, which pairs with the punt: FG% is the category that a punt FT% roster is most likely to dominate.
  • Rim protectors. Shot blocking is one of the scarcest categories and the hardest to find after the draft, as RotoWire notes of blocks and assists. A defensive anchor who is a poor free throw shooter is a discount you can only collect on if you punt.
  • Rebounders with limited range. A center who rebounds heavily and finishes at a high rate but cannot shoot from the line gives you two category wins at the price of one that you gave up.
  • Athletic forwards with steals and blocks. Versatile defenders whose free throw shooting is the only thing holding down their value.

You can verify any specific player’s free throw percentage and attempts on a public stats page. We have deliberately not named players here, because a name from an old season is the easiest thing in the post to be wrong about.

What should you target and what should you avoid?

Target FG%, rebounds and blocks with your early picks, because those are the categories the archetypes above produce. The category plan lets you mark FG%, REB and BLK as targets (double weight) while FT% is a punt (zero weight). Then use the rankings, which re-sort for your plan.

Avoid paying for free throw shooting. A guard who is elite at the line and otherwise average is worth less to you than the rankings show, because the strength you are paying for no longer scores. This is the main way a punt build goes wrong in a draft: a few picks in, you reach for a player who looks balanced and quietly spend value on the category you gave up.

A common pairing is punting FT% and three-pointers together. Big men who do not shoot threes and miss free throws are cheap, and a roster of them is strong in the interior categories. Be honest about the cost: two punts leave you needing to win five of the other seven categories every week. See the punt guide for the arithmetic.

What does the draft order look like?

A rough shape, not a script:

  1. Rounds 1 and 2: take the best player, not the best punt fit. Your first picks often decide which punt makes sense. If the board hands you a dominant big man who is weak at the line, you are already half built. Do not force it with the first pick.
  2. Rounds 3 to 8: commit. Once you have one anchor, re-rank everyone with FT% at zero and draft the top of that list. This is where the build earns its edge, because other managers still price in the free throw penalty.
  3. Middle rounds: fill the scarce categories. Blocks and assists are hard to add after the draft. Make sure the build covers blocks, and decide whether you need to chase threes or steals.
  4. Late rounds: free throw percentage is irrelevant. Take the best available per-category producer without worrying about the line. This is when the pool feels weirdly deep, because you are no longer filtering anyone.

What are the pitfalls?

Half-punting. Rostering two poor free throw shooters and then drafting a great one to “balance it out” spends value on a category you will lose anyway. Commit or do not.

Punting without enough volume elsewhere. The build needs FG%, rebounds and blocks to carry. If your roster is short in two of those, you gave up a category and got nothing for it.

Ignoring minutes. A poor shooter who sits in close games or plays limited minutes does not give you the volume you are drafting him for. The archetype needs real playing time.

Forgetting the games limit. If your league has a games limit, a roster of high-minute bigs can reach the cap early in the week. The ESPN games limit guide explains how to spend your games.

Dropping the plan mid-season. A punt FT% team that streams a good free throw shooter for a week gains nothing. In head-to-head, a lost category is one loss out of nine, so a roster should lean into the build and treat the line as someone else’s problem.

A worked example, with made-up numbers

These numbers are invented to show the mechanism, not taken from any player.

Suppose a center averages 10 free throw attempts a game and makes 45% of them. Against a league-average shooter at 78% on the same attempts, he costs your team about 3.3 made free throws per game. That is a large negative in a balanced ranking, and it is why a player like this falls down a draft board. If he also adds a big FG% number, strong rebounds and blocks, he can be a top-15 player once FT% is out of the sum. In the punt build you take the points of value everyone else is subtracting.

The short version

Punt FT% when your early picks point to bigs who rebound, block and shoot a high field goal percentage. Draft by a ranking re-sorted with FT% at zero, protect the scarce categories, avoid paying for free throw shooting, and commit to the build for the whole season.

Common questions

Why is punting FT% so common?

The players it unlocks are concentrated: big men who score and rebound well but miss free throws. RotoWire calls the shooting percentage categories the most commonly punted ones.

What categories does a punt FT% team win?

Usually field goal percentage, rebounds and blocks, because those come from the same bigs. Pair it with the rest of your roster to cover points, steals and threes.

Can I punt FT% and another category?

Yes, but two punts leave you needing five wins from seven categories every week. Three punts make that five from six, which is very hard to sustain.

When should I commit to a punt FT% build?

After your first picks. If the board hands you a dominant big man who is weak at the line, you are already half built; re-rank with FT% at zero and draft from that list.

Sources

Checked on .

Try in tradeCompare

Per-game numbers in the named window. Games are this season's schedule under your league's games limit.